PRODUCS LIST
- Agricultural sprinkler irrigation unit ...
- In veneer-type drip irrigation belt manufacturing unit
- Tape type drip irrigation belt manufacturing unit
- Multi-layer micro jet with a crew
QUALITY
To live by quality,To develop by prestige We belive that creditability is lifeblood of enterprises
PRODUCTS
Main technical parameters:
1, performance: with thin-walled hose sprinkler irrigation product line, manufactured using a special plastic material, the overall drop hole one-time vacuum hot pressing, manufacture high precision, can effectively prevent blockage, the water evenly. Durable products, aging resistance, and can be used three or more growing season. Investment is only 70-300 per acre (based on crop cultivation methods may be).
2, the scope of application: A, black fungus, mushrooms and other fungi; B, seedling, leaf vegetables, etc.
Construction features:
|
Name
|
Size
|
Diameter
（mm） |
Wall thickness(mm)
|
General drip hole spacing(mm)
|
Aperture
(mm) |
Burst pressure(kgf/cm2)
|
0.5 m when the flow head（L/H/M）
|
Spray width of the largest bilateral
(M） |
|
Suspended micro jet with
|
N50 nine holes
|
31.8
|
0.22
|
200
|
0.4/0.5
|
1.5
|
100/110
|
5
|
This product meets the international standard ISO17118-1997.
Note: The micro jet with the width of the nozzle size, spacing, number of holes can customize products according to user needs. For users of other indicators of change, determined by the supply and demand sides. Spraying width of the water supply pressure, valve can be used for self-regulation.
Drop hole and nozzle diameter to allow deviation of ± 15%. In addition, specific requirements can also be customized according to user specifications of other products.
4, Attention:
1, micro jet belt laid flat, not discount or knotted distortions.
2, to prevent the tiny spray zone into the sand, soil and other debris.
3, using the common links to be adjusted the valve outlet hole size or use links in order to ensure uniformity of the tiny spray with water.
4, in charge with a bogey directly connected to the high pressure pump, the middle is best to use thick tube transition, should more than 10 meters length.
5, if the poor water quality, please wrap the pump inlet filter film office or use the filter.
6, melt ahead of the best fertilizer to ensure that no particulate matter.
7 crops keep the ground level, to avoid the height difference is too large.
8, transport, laying in the non-mechanical or human injury.
9, Huancha, it will be kept after removal equipment in the shade.